| Description | Master Bond EP29LPSP is a two component epoxy adhesive, sealant that can withstand temperatures as low as 4K. It is resistant to cryogenic shocks ,from room temperature down to liquid helium temperatures, in a 5-10 minute time period. The system is NASA low outgassing approved. Additional features Master Bond EP29LPSP is a two component epoxy adhesive, sealant that can withstand temperatures as low as 4K. It is resistant to cryogenic shocks ,from room temperature down to liquid helium temperatures, in a 5-10 minute time period. The system is NASA low outgassing approved. Additional features include optical clarity, electrical insulation and low viscosity. EP29LPSP bonds well to a wide variety of substrates including metals, glass, ceramics, composites and many different plastics. The working life is long, a 100 gram mass will allow over 4-5 hours of working life.... Read More | Master Bond EP21TCHT-1 is a two component, thermally conductive, heat resistant, epoxy compound formulated to cure at ambient temperatures or more rapidly at elevated temperatures, with a 100 to 60 mix ratio by weight. EP21TCHT-1 passes NASA outgassing tests. It is a high strength adhesive and Master Bond EP21TCHT-1 is a two component, thermally conductive, heat resistant, epoxy compound formulated to cure at ambient temperatures or more rapidly at elevated temperatures, with a 100 to 60 mix ratio by weight. EP21TCHT-1 passes NASA outgassing tests. It is a high strength adhesive and produces bonds that are both tough and durable. It resists thermal cycling and many chemicals including water, fuels and most organic solvents. It has a service temperature range of 4K up to 400°F. It adheres well to metals, glass, ceramics, rubbers and many plastics. The hardened adhesive exhibits high thermal conductivity and superior electrical insulation. The thermal expansion coefficient is remarkably low. EP21TCHT-1 is widely used in aerospace, electronics, electronic, automotive and chemical industries. As a NASA qualified system, it is ideal for high vacuum type applications, particularly those where elevated temperature cures are not possible. It also passes MIL-STD-810G for fungal resistance, and withstands 1,000 hours at 85°C/85% RH.... Read More | EP30-4Med is a two part epoxy system with a fast set up time that cures at room temperature, or even more rapidly with a bit of heat. It resists EtO sterilization, and can also withstand most detergents, disinfectants, bleaches and liquid sterilants. It is recommended for both disposable and EP30-4Med is a two part epoxy system with a fast set up time that cures at room temperature, or even more rapidly with a bit of heat. It resists EtO sterilization, and can also withstand most detergents, disinfectants, bleaches and liquid sterilants. It is recommended for both disposable and reusable instruments.... Read More | EP3UF is a one component epoxy that contains thermally conductive fillers with very small particle sizes imparting a low thermal resistance. This low viscosity system has good flow properties and can be applied in bond lines as thin as 10-15 microns. | Master Bond Polymer System EP42HT-2Med is a two component, high temperature resistant epoxy for medical device assembly. Is is USP Class VI approved and passes ISO 10993-5 for cytotoxicity. It withstands different types of repeated sterilization cycles. It has an easy to use 100 to 40 mix r.atio by Master Bond Polymer System EP42HT-2Med is a two component, high temperature resistant epoxy for medical device assembly. Is is USP Class VI approved and passes ISO 10993-5 for cytotoxicity. It withstands different types of repeated sterilization cycles. It has an easy to use 100 to 40 mix r.atio by weight or 100 to 50 by volume. The system bonds well to a wide variety of substrates including metals, composites, ceramics, glass, as well as plastics and rubbers. It is highly resistant to acids, bases, solvents, and numerous sterilants... Read More |
| Quantity | 1/2 pint kits, pint kits, quart kits, gallon kits, premixed and frozen syringes | 1/2 pint kits, pint kits, quart kits, gallon kits, premixed and frozen syringes | ½ pint kits, pint kits, quart kits, gallon kits, gun dispensers | 10cc syringes, 30cc syringes | 30 cc syringe kits, ½ pints, pints, quarts, gallons, 5 gallons |
| Applications | Bonding, sealing, potting, casting | Bonding, sealing | Bonding, sealing, coating, casting | Bonding, underfill | Bonding, sealing, coating, encapsulation |